gipuzkoakultura.net

Logo de la Diputación Foral de Gipuzkoa
Logotipo gipuzkoakultura

gipuzkoakultura.net

2024ko martxoak 29, ostirala





Bertan > Bertan 16 Burdinaren Industria > Ingeles bertsioa: The triumph of metal processing

Printable PDF version [12,18 Mb]Acrobat icon

The triumph of metal processing

101. Forged nails.
101. Forged nails.

103. Forging tools.
103. Forging tools.


99. La Cerrajera Guipuzcoana was one of the original factories which merged in 1906 to form Unión Cerrajera, an emblematic company in the industry.
99. La Cerrajera Guipuzcoana was one of the original factories which merged in 1906 to form Unión Cerrajera, an emblematic company in the industry.
98. Manufacturer’s brand on a parallel lathe from 1920-1930.
98. Manufacturer's brand on a parallel lathe from 1920-1930.
In Guipuzkoa the combination of geographical conditions, an insufficient level of raw materials, and the absence of capital-such as that obtained in Bizkaia from the mass exportation of ore-meant that industry in the province tended to concentrate on the processing of the metal. The main features of this new development were the large number of industries, the maximum use made of natural resources and the omnipresent figure of the small and medium industrialist who, with few economic resources and often starting from artisan methods, had decided to take their chances and develop larger industrial businesses.

100. Arms manufacture continued to be one of the mainstays of the metallurgical industry in Gipuzkoa throughout the nineteenth and twentieth centuries. Case with nineteenth-century duelling pistols.
100. Arms manufacture continued to be one of the mainstays of the metallurgical industry in Gipuzkoa throughout the nineteenth and twentieth centuries. Case with nineteenth-century duelling pistols.
Taking advantage of the few iron deposits, following the old iron-making tradition, exploiting the water resources available to them, and importing crude iron and coal, the modern metallurgical industry was gradually built up, geared primarily towards making a wide range of different tools. It is hardly surprising that the industry once more took off, especially in the light of the attempts at renovation undertaken by the Royal Basque Society of Friends of the Country and the arms industry of the Mid-Deba area, led by with Placencia, Eibar, Elgoibar, Ermua and Bergara. These towns were later joined by Arrasate-Mondragón in a late attempt to establish itself as the centre of the Gipuzkoan arms industry,

102. Casting pig iron, Altos Hornos de Bergara.
102. Casting pig iron, Altos Hornos de Bergara.
The transfer of the customs posts from the Ebro river to the sea and Irun (1841), the "O'Donnell Law" which aided the free sale of arms in the Iberian peninsula (1860), the adoption of new technologies, the opening of foreign markets, mainly in the Americas and Europe, and the disappearance of the rigid guild system, all combined to make the second half of the nineteenth century a golden age for the metal processing industry.

105. Forging work at Patricio Echeverria (Legazpi).
105. Forging work at Patricio Echeverria (Legazpi).

106. Ore depots at the Mollarri loading jetty (Zarautz).
106. Ore depots at the Mollarri loading jetty (Zarautz).


107. Damascene revolver inlaid with gold, Eibar.
107. Damascene revolver inlaid with gold, Eibar.
The progress marked by the blast furnace of Beasain in 1862 was to be the starting point for a series of developments in the industry. Just a year before, "Vergarajauregui, Resusta and Cía" had been founded in Arrasate-Mondragón. This was to develop into one of the most important companies in the province, the "Union Cerrajera de Mondragón". The joining of forces with two or more industrialists forming limited companies, was to be another of the touchstones of this modernisation process.

108. Furnaces for calcining ore in Aizpea (Zerain).
108. Furnaces for calcining ore in Aizpea (Zerain).
En los años siguientes los talleres y las fábricas de productos metalúrgicos proliferan, crecen y se renuevan. La producción de armas aumenta, y lo mismo ocurre con otros productos como clavos, tornillos, puntas de París, herramientas, etc. Esto trae consigo una mayor demanda de materias primas y es así como nacen las grandes fundiciones.

110. Remains of the loading platform at the Mollari loading jetty (Zarautz).
110. Remains of the loading platform at the Mollari loading jetty (Zarautz).
This is the case of S.A. Aurrera in Eibar, which was founded in 1883 at the initiative of a group of industrialists from the town, who prepared cast iron in two cupolas to supply the array of small manufacturers of high-quality arms, who had previously been dependent on French and Belgian imports. A similar case is that of Romualdo García who founded San Pedro de Elgoibar in 1877 to manufacture iron from charcoal. Their numbers gradually swelled with the appearance of other foundries such as Molinao in Pasaia, Fundición Fossey in Lasarte and the Real Compañía Asturiana de Minas, which built a lead foundry in Errenteria using the ore from the San Narciso mine in Irun, as well as others which formed a constituent part of self-contained companies such as Union Cerrajera, C.A.F., and Patricio Echeverría.

109. Steel mill, casting the pig-iron.
109. Steel mill, casting the pig-iron.
A common feature of all of these foundries was their low volume and production capacity in general terms, but they nonetheless employed a large number of operators and had the largest capital investments in Gipuzkoan industry, if we exclude a handful of highly-capitalised giants like the paper industry. According to the Industrial Census of 1915 only about ten metal enterprises had more than a hundred employees, and there were a large number which had less than ten. (LUENGO TEIXIDOR, 1990)

113. GAC bicycle.
113. GAC bicycle.

114. Bicycle workshop in Eibar.
114. Bicycle workshop in Eibar.


116. Alfa sewing machine.
116. Alfa sewing machine.

112. Boring and calibration of cannons. Victor Sarasqueta. Eibar.
112. Boring and calibration of cannons. Victor Sarasqueta. Eibar.


115. Llama Gun, Eibar.
115. Llama Gun, Eibar.
Company Name Workers
Sociedad Española de Construcciones Metálicas (Beasain)960
Unión Cerrajera de Mondragón (Arrasate)870
Orbea (Mallabia)347
Garate, Anítua y Cía (Eibar)304
Unión Cerrajera (Bergara)201
ábrica de Cañones (Soraluze)188
Trocaola, Aranzabal y Cía (Eibar)143
Aizmendi (Eibar)126
Fábrica de Plomo de Capuchinos (Errenteria)114
Fundiciones Molinao (Pasaia)104
117. Machine Tool Museum in Elgoibar.
117. Machine Tool Museum in Elgoibar.

Diversification and geographical distribution

121. Smelting, forging, manufacture and machining are all essential processes in the Gipuzkoan iron industry.
121. Smelting, forging, manufacture and machining are all essential processes in the Gipuzkoan iron industry.
During this new stage, arms manufacture required diversification of production, while at the same time different specialities began to emerge at regional, municipal and even more local level. In 1859 the masters from the now extinct guilds began to band together into associations. Eight cock-makers from Eibar formed a society for manufacturing cocks for rifles, pistols and revolvers. The same thing happened in Soraluze-Placencia, where the "Euskalduna" company was founded in 1862: in its first ten years, it was to produce more than 70,000 guns. By this stage, the Orbea brothers (1859) from Eibar had already transformed their mill in Urkizu into a small factory for making carbines. With a flair for anticipating future developments, they soon introduced technical innovations into the manufacturing process, such as mechanical polishing, nickel plating using electroplating, and, most importantly, electricity, a development in which they were pioneers in Gipuzkoa (1890).

119. Manual forging in GSB Acero, Legazpi.
119. Manual forging in GSB Acero, Legazpi.
With the introduction of this new source of energy, arms manufacture attained record levels. In addition to Orbea, Larrañaga and Joaristi, the main manufacturers, other new names appeared, such as Victor Sarasqueta, Arizmendi, Trocaola, Aguirre, Zamacola y Cía, Crucelegui, Anitua, Beristain, etc. By 1906, the arms industry employed 54% of the workforce of Eibar, 50% in Soraluze-Placencia (where the former Euskalduna, now renamed S.A. Placencia de las Armas, gave work to 180 operators), and 11% in Elgoibar (AGIRRE KEREXETA, 1987). Eibar was by now recognised as the main arms manufacturing town on the Iberian peninsula.

120. GSB Acero, Legazpi, large-tonnage forging.
120. GSB Acero, Legazpi, large-tonnage forging.





Excessive dependency on foreign markets, however, was to lead to a serious downturn in 1914, though Spain's neutrality in First World War was to bring a temporary reprieve which came to an end after the armistice was signed in 1918 and the main European producers re-established themselves abroad. We can therefore consider that the golden age of the modern arms industry was between 1900 and 1917. From then on, and fundamentally from the mid-1920s on, the industry was forced to diversify.

122. Altos Hornos de Bergara, Electric furnace.
122. Altos Hornos de Bergara, Electric furnace.
A range of new products were manufactured as a result, including bicycles (G.A.C. in 1925; Orbea in 1929), sewing machines (Alfa in 1927), machine tools (Parabán y Cía, Orbea y Larrañaga, Juan Esperanza, Cruz, Ochoa y Cía, Estarta and Ecenarro in 1924), electrical appliances (Anitua e Hijos, Solac), screws (Aguinaga, Lete, Egaña and Madina); electrical apparatuses (Hormaechea), domestic utensils (Elma), forging and stamping (Garaciaga), machine-tools (Arriola y Cía, Forjas de Elgoibar, Alcorta, Unzueta y Cía, Mugarza, Ugarte y Cía, Crucelegui Hnos), locks (La Industrial Mondragonesa and Metalurgica Cerrajera) and hardware (Roneo and Altuna y Garay).

The dominance of the arms industry, which had been the main occupation of the Lower Deba area, was over and the result was a trend which to mark the industrial fabric of the region: extension and reorientation of production towards newer and more innovative markets.

123. Construcción y Auxiliar de Ferrocarriles (CAF) in Beasain.
123. Construcción y Auxiliar de Ferrocarriles (CAF) in Beasain.
In the Donostia-San Sebastian area there were companies such as Talleres Urcola (1917), manufacturing railway material and forging, and Herederos de Ramón Mugica which also built transport material in general and railway material in particular. In Urretxu Honorio Alberto S. A made steel springs. Metal works sprang up alongside the great shipyards such as Fundiciones Luzuriaga in Pasaia and Balenciaga in Zumaia. In Azkoitia, Acerías y Forjas de Azkoitia S.A., which dated back to 1515 and the Zubillaga forge in Oñati, made all kinds of forged metal tools. Tolosa was home to Fundiciones Telleria (1842), which manufactured cast iron and Voith a distributor of electric turbines, and, finally, Lazcano had Forjas Hijos de A. Albisu, founded in 1848.

124. Altos Hornos de Bergara.
124. Altos Hornos de Bergara.
Nonetheless, the most important single activity was still arms manufacture. In the mid 1920s, the manufacture of arms and its auxiliary industries accounted for 80% of the processing industry, but other specialisations were emerging, such as automobile accessories, electrical equipment and domestic appliances, as well as hardware, nuts and bolts, locks and machine tools. this new diversification was to cushion the eventual collapse of the arms industry.

125. GSB, large tonnage forging
125. GSB, large tonnage forging
Like so many other areas of everyday life, however, industrial progress was cut short by the Spanish Civil War; not only by the direct devastation caused of the conflict itself but also by its indirect impact in material, commercial and human terms. In many cases the survival of businesses or the handover to a new generation was blocked by the Franco administration's to any ideology it considered to be a threat to the regime (Basque nationalism, liberalism, communism, republicanism... etc.), leaving companies without managers or unwilling to take certain directions out of a fear of political purges. At the same time, international isolation and the economic blockade strangled industrial development during the first decade of the Franco regime. The large self-contained factories were in the best position to weather out this crisis and in the long run, some benefited by the protection their products enjoyed on the Spanish domestic market. Smaller companies, though, found it more difficult to ride out the years of isolation, and over subsequent years new industries were set up to meet the demand for products which had previously been imported.

As a result, despite destruction, scarcity of raw materials and political purges, by the mid-1950s, the metal industry once again stood at the head of Gipuzkoan industry and although not hegemonous, its pace of development a barometer of the province's economic health, reflecting better than any other industry developments such as the oil crisis of the 1970s, the restructuring of the 1980s and the commitment to new technologies, diversification and versatility of the last years of the century.

126. Altos Hornos de Bergara, casting the pig iron.
126. Altos Hornos de Bergara, casting the pig iron.
104. 111. Brands of arms manufacturers from Eibar.
104. 111. Brands of arms manufacturers from Eibar.
The list of companies dating from these years is long, but unquestionably the three flagships of the industry-for their long industrial career and their economic importance for the province-were Patricio Echeverría in Legazpi, C.A.F in Beasain and Union Cerrajera in Arrasate-Mondragón.

Licencia Creative Commons. Pulse aquí para leerla
2024 Kultura eta Euskara Departamentua- Gipuzkoako Foru Aldundia.
Para conectar con nosotros mediante skype pulse aquí
Logotipo Gipuzkoa.net. Pulsar para ir a la página de Gipuzkoa.net